Description

Possible grades, structure, form and applications:

• Zinc coated (Z) Galvanized (GI) and Zinc-iron alloy coated (ZF) Galvannealed (GA) products available.
• Variable grades are available as per below table. (See Below Table 1)
• Coils, slitted coils or cut to length forms available
• Trimmed (cut edge) or Mill Edge
• Non-Skin Passed (bright) or Skin Passed (Matt or Bright) surface possible.
• Different Oiling amount (both surfaces) (See Below Table 2)
• Chemical Passivation options: Chromated with CR+3 (as standard) or CR+6 or Non-Chromated
• Surface Qualities: A, B and C surface qualities (accordance to EN10346) (See below Table 3)
• Coil inner diameter 508mm (20”) or 610 mm (24”) (+/- 20 mm) depending on request
• Spangles: Minimized or Zero Spangle (Min spangle close to Zero)

Possible Coating range:

Zinc Coatings                           : min Z40 (G13) … max Z600 (G200)

Zinc-iron alloy Coatings           : min ZF75 (A25), ZF120 (A40), max ZF180 (A60)

Dimensions for Galvanized / Galvanealed Coils:
Thickness: 0,25 mm – 4,00 mm (0.0098 inch – 0.1575 inch)

Width: max 1.530 mm (max 60,236 inch)
Coil Weight: Max 30 metric tons (66,138.678 lbs)

Coil ID: 508 mm / 610 mm (20 inch / 24 inch)

Dimensions for Galvanized / Galvanealed Sheets:
Length: Max 12.000 mm (max 39.37 ft)
Thickness: 0,25 mm – 4,00 mm (0.0098 inch – 0.1575 inch)

Width: max 1.530 mm (max 60,236 inch)
Pallet weight: max 5,0 metric tons (max 11,023.11 lbs)

Dimensions for Galvanized / Galvanealed Strips:
Width: max 1,530 mm (max 60,236 inch)
Thickness: 0,25 mm – 4,00 mm (0.0098 inch – 0.1575 inch)

Packing: max 10,0 metric tons (max 22,046.22 lbs)

Coil ID: 508 mm (20 inch)